Transfer Sheet - Made to Worship -WH

 Screen Print Transfer Sheet Only- Made to Worship -WH

PRESSING INSTUCTIONS: Pre-Press Garment for 5 seconds to get out any moisture. 

Temp: 325-350°F 

Pressure: Heavy 

Time: 7-10 Seconds 

Peel: Hot 

Do not use butcher paper or any cover over this transfer when pressing. A commercial grade heat press is highly recommended (no iron, Cricut EasyPress). 

TRANSFER STILL NOT ADHERING? TRY THESE ADDITIONAL TIPS 

1. Lightly lift the transfer at the corner to see if the design adheres, if not, increase the temperature by 5-10  degrees and repress for 10- 30 seconds. Continue this until you find your sweet spot. 

2. Don't press over a raised neckline, this can cause an uneven press. 3. Pressing pillows can assist in providing an even press. 

4. Investing in a heat gun will let you know if your heat press is heating up evenly. 

*Please note the time and temp are suggested and you may have to adjust based on your own presses best settings. 

ALL SALES ARE FINAL, We are not responsible for any application mishaps. Make sure you are following pressing instructions. We recommend ordering a few extras if this is your first time using our transfers.